| Data Acquisition Systems |
| Basic Multichannel Acquisition Processor (MAP) System, Upgrades, and Software |
| MAP/16 |
Standard configuration MAP hardware, 16 channels (1 SIG + 1/2 DSP) |
| MAP/32 |
Standard configuration MAP hardware, 32 channels (2 SIG + 1 DSP) |
| MAP/48 |
Standard configuration MAP hardware, 48 channels ((3 SIG + 1 1/2 DSP) |
| MAP/64 |
Standard configuration MAP hardware, 64 channels (4 SIG + 2 DSP) |
| MAP/80 |
Standard configuration MAP hardware, 80 channels (5 SIG + 2 1/2 DSP) |
| MAP/96 |
Standard configuration MAP hardware, 96 channels (6 SIG + 3 DSP) |
| MAP/128 |
Standard configuration MAP hardware, 128 channels (8 SIG + 4 DSP) |
| |
|
|
|
| top |
|
|
|
| |
| MAP System Upgrade Boards |
| SIG/16 |
Signal board with 16 channels |
| DSP/16 |
DSP board with 16 channels |
| DSP/32 |
DSP board with 32 channels |
| DSP/UPG |
DSP board upgrade from 16 to 32 channels |
| DI |
Digital input daughterboard |
| DO |
Digital output sub-board for 8 DSP channels |
| HLK2/UPG |
Host link board (MXI) upgrade - exchange HLK1 board for HLK2 board |
| |
|
|
|
| MAP System Control Program Software |
| MCP/16 |
16-channel MAP system control program software (RASPUTIN, Offline Sorter, WaveTracker, and all utilities), 2 OFS keys ( USB), and 1 parallel port MAP key |
| MCP/32 |
32-channel MAP system control program software (RASPUTIN, Offline Sorter, WaveTracker, and all utilities), 2 OFS keys (USB), and 1 parallel port MAP key |
| MCP/64 |
64-channel MAP system control program software (RASPUTIN, Offline Sorter, WaveTracker, and all utilities), 2 OFS keys (USB), and 1 parallel port MAP key |
| MCP/96 |
96-channel MAP system control program software (RASPUTIN, Offline Sorter, WaveTracker, and all utilities), 2 OFS keys (USB), and 1 parallel port MAP key |
| MCP/128 |
128-channel MAP system control program software (RASPUTIN, Offline Sorter, WaveTracker, and all utilities), 2 OFS keys (USB), and 1 parallel port MAP key |
| MCP/UPG-16-32 |
MAP system control program software upgrade from 16 channels to 32 channels |
| MCP/UPG-16-64 |
MAP system control program software upgrade from 16 channels to 64 channels |
| MCP/UPG-16-96 |
MAP system control program software upgrade from 16 channels to 96 channels |
| MCP/UPG-16-128 |
MAP system control program software upgrade from 16 channels to 128 channels |
| MCP/UPG-32-64 |
MAP system control program software upgrade from 32 channels to 64 channels |
| MCP/UPG-32-96 |
MAP system control program software upgrade from 32 channels to 96 channels |
| MCP/UPG-32-128 |
MAP system control program software upgrade from 32 channels to 128 channels |
| MCP/UPG-64-96 |
MAP system control program software upgrade from 64 channels to 96 channels |
| MCP/UPG-64-128 |
MAP system control program software upgrade from 64 channels to 128 channels |
| MCP/UPG-96-128 |
MAP system control program software upgrade from 96 channels to 128 channels |
| |
|
|
|
| Installation and Shipping for MAP |
| INS |
On-site installation and training (Domestic) |
| IIT |
On-site installation and training (International) |
| CRT |
Crating and handling |
| SHP/MAP |
Shipping charges (determined at time of shipment) |
| top |
|
|
|
| Neural Data Acquisition System - 16-Channel Recorder System |
| REC/NI-SW |
Recorder Neural Data Acquisition software for National Instruments E-series A/D
card (1 parallel port key license, CD, manual) |
| ADC/16C-12B-2 |
National Instruments A/D subsystem plus accessories (SCB-68, CBL/SCB-68 cable,
and PCI-6070E board) for 16-channel analog recording (1.25 MS/sec, 12-bit res.) |
| PBX2/16wb-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 16 wide-band channels (3Hz-8kHz, 50x gain) |
| POW/PBX-110V |
Preamplifier power supply, US version, 110V, with 5 ft. power cable |
| CBL/PBX-16-15L |
Data cable for 16 preamplifier channels, 15 ft. length |
| HST/8o50-G20-GR |
8-channel Omnetics .050 [10-pin] headstage, gain 20, grounded reference, 2 @ $500 each |
| HSC/8o50 |
8-channel Omnetics headstage cable, 36" length, 2 @ $200 each |
| HTU/8o50 |
Headstage tester unit, 8-channel Omnetics .050 |
| DELL/OptiPlex745 |
Dell Optiplex 745 Minitower, Core 2 Duo, 250GB hard drive, 2.13GHz, 1.0GB RAM, DVD/CD-RW, Dual Video, WinXP
|
| MON/20LCD-W |
20 in. wide-aspect, flat-panel monitor |
| OFS/v2-2usb |
Offline Sorter software, version 2 with OFS2 manual, 2 USB keys (two seat license) |
| NEX/v4-3usb |
NeuroExplorer Data Analysis software, version 4 with manual, three seat license
(USB keys) |
| |
|
|
|
| Neural Data Acquisition System - 64-Channel Recorder System |
| REC/64 |
REC/ADS-SW: Recorder Neural Data Acquisition software for Plexon 64ch A/D card (1 parallel port key license, CD, manual) |
| Included components |
AMP/64wb: Preamplifier for 64 wide-band channels with 2-pole low-cut and 4-pole high-cut filters (1Hz-8kHz), software-programmable gain and monitor channel |
|
|
| Included components |
POW-AMP/64wb-110V: Power supply for 64-channel preamplifier, 110 Volt |
|
|
| Included components |
IP/16: 16-channel auxiliary input board (analog or digital) for ADS/64 |
|
|
| Included components |
ADS/64: 64-channel A/D subsystem (16-bit res., 40kHz per channel) plus accessories (10 foot cable to interface AMP/64wb preamplifier) |
|
|
| DELL/OptiPlex745 |
Dell Optiplex 745 Minitower, Core 2 Duo, 250GB hard drive, 2.13GHz, 1.0GB RAM, DVD/CD-RW, Dual Video, WinXP |
| Mon/20LCD-W |
MON/20LCD-W 20 in. wide-aspect, flat-panel monitor |
| HDS/507 |
Hameg 507 digital oscilloscope |
| HST/16o50-G20-R00 |
16-channel Omnetics .050 [2X10-pin] headstage, gain 20, grounded reference, 4 @ $900 each |
| HSC/16o50 |
16-channel Omnetics .050 headstage cable, 36" length, 4 @ $300 each |
| HTU/8o50 |
Headstage tester unit, 8-channel Omnetics .050 |
| OFS/v2-2usb |
Offline Sorter software, version 2 with OFS2 manual, 2 USB keys (two seat license) |
| NEX/v4-3usb |
NeuroExplorer Data Analysis software, version 4 with manual, three seat license (USB keys) |
| |
|
|
|
| top |
|
|
|
| |
|
|
|
| MEA Workstation - 64-channel Multielectrode Array (MEA) Recording System |
| MEA-WS/64 |
MEA-WS/S: 64-channel MEA Workstation control program software |
| Included components |
AMP/62sp+2: Preamplifier for 62 spike channels with 2-pole low-cut and 4-pole high-cut filters (250Hz-8kHz), software-programmable gain, monitor channel, and two TTL inputs |
|
|
| Included components |
POW-AMP/62sp+2: Power supply for 62-channel preamplifier, US version, 110 Volt |
|
|
| Included components |
ADS/64: 64-channel A/D subsystem (16-bit res., 40kHz per channel) plus accessories (3-foot cable to interface preamplifier) |
|
|
| DELL/OptiPlex745 |
Dell Optiplex 745 Minitower, Core 2 Duo, 250GB hard drive, 2.13GHz, 1.0GB RAM, DVD/CD-RW, Dual Video, WinXP
|
| Mon/20LCD-W |
MON/20LCD-W 20 in. wide-aspect, flat-panel monitor |
| INS |
On-site installation and training (Domestic) |
| OFS/v2-2usb |
Offline Sorter software, version 2 with OFS2 manual, 2 USB keys (two seat license) |
| NEX/v4-3usb |
NeuroExplorer Data Analysis software, version 4 with manual, three-seat license (USB keys) |
| |
|
|
|
| Items to record from University of North Texas MEA plate |
| MEAP/64 |
Multielectrode array preamp for 64-channel University of North Texas MEA electrode plate, 50x gain, 3Hz-13kHz (1-pole) filtering, with switches to assign pass-through stimulation channels |
| CBL/MEAP |
Cable to interface MEAP/64 preamp to AMP/62sp+2 preamp, 2 foot length |
| |
|
|
|
| Items to record from Multichannel Systems MEA |
| CBL/MCS-MEA |
Cable to interface Multichannel Systems MEA 1060 Amplifier to AMP/62sp+2 preamp, 2 foot length |
|
|
| |
|
|
|
| top |
|
|
|
| |
| Video Recording and Tracking |
| CinePlex |
| CPX |
CinePlex digital video recording and neural data file sync tool - includes CPX Capture and CPX Playback and Mark-up Tool; LCD Monitor |
| CPX/CAM-ULNS-30 |
CinePlex camera CAM/DFK21F04 and universal lens CPX-Lens,
30 Hz |
| CPT |
Tracking option for CinePlex Capture module - position tracking software and hardware interface |
| CBL/CPX-40 |
Cable to interface CPX to MAP system that has standard ADC/NIDAQ subsystem (40 kHz clock), DI daughter board and DSP front panel |
| CBL/CPX-80 |
Cable to interface CPX to MAP system that has a high speed ADC/NIDAQ subsystem (80 kHz clock, TIMm2), DI daughter board and DSP front panel |
| CBL/CPX-NI |
Cable to interface CPX to NI based REC system. Requires modified breakout panel (PBOB or SCB-68) |
| CBL/CPX-CHUB |
Cable to interface CPX to NI based REC system with C-HUB |
| CBL/CPX-BW |
Cable to interface CPX to user equipment. Cable has bare wires (stripped & tinned) on distal end. |
| CPX/UPG-hdwr-v1.2 |
Cineplex hardware upgrade from version 1.0 or 1.1 to version 1.2. Includes Dell Optiplex 745DT computer, PCI digital I/O board, Firewire PCI card, USB-USB link. |
| CPX-ms |
CinePlex markup software license, 1 USB key |
| |
|
|
|
| Electrodes and Electrode Drives |
| NAN Electrode Drives - These are standard electrode drives with circular base mount. |
| NAN-SYS-1 |
Complete 1-channel NAN Electrode Drive System (Electrode base for holding 4 channels, 8-channel control box, 8-channel control software, and 1 electrode tower) |
| NAN-SYS-2 |
Complete 2-channel NAN Electrode Drive System (Electrode base for holding 4 channels, 8-channel control box, 8-channel control software, and 2 electrode towers) |
| NAN-SYS-3 |
Complete 3-channel NAN Electrode Drive System (Electrode base for holding 4 channels, 8-channel control box, 8-channel control software, and 3 electrode towers) |
| NAN-SYS-4 |
Complete 4-channel NAN Electrode Drive System (Electrode base for holding total number of channels ordered [from 4 to 8], 8-channel control box, 8-channel control software, and 4 electrode towers) |
| NAN-SYS-9 |
Complete 9-channel NAN Electrode Drive System (Electrode base for holding total number of channels ordered [from 9 to 16], 16-channel control box, 16-channel control software, and 9 electrode towers) |
| |
|
|
|
| Optional NAN Components |
| CMS |
Coarse Movement System |
| XYT |
XY Table with Coarse Movement System |
| RTBL-CMS |
Two-degree of freedom rotation table, with Coarse Movement System |
| RTBL-M-CMS |
Two-degree of freedom rotation table, with motorized Coarse Movement System |
| MFD-4 |
Manifold for passing up to 4 electrodes through one sharpened guide tube
(including manifold holder) |
| MFD-8 |
Manifold for passing up to 8 electrodes through one sharpened guide tube
(including manifold holder) |
| GT |
Guide tube, 70 mm length |
| GT-s |
Sharpened guide tube, 70 mm length |
| ELT |
Additional Electrode Tower, with guide tube assembly |
| CB-UPG |
Control Box Upgrade and software for controlling an additional 8 electrode channels |
| NAN Ext. Mount |
Adapter for external sterotaxic frame mounting of NAN electrode drive |
| |
|
|
|
| System Accessories |
| Preamplifiers, Digital Input Accessories, and Analog Recording Options |
| Spike Preamplifiers - These preamplifiers have multi-pole filtering |
| PBX2/16sp-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 16 spike channels
(100Hz-8kHz, 50x gain) |
| PBX2/16wb-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 16 wide-band channels
(3Hz-8kHz, 50x gain) |
| PBX2/32sp-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 32 spike channels
(100Hz-8kHz, 50x gain) |
| PBX2/48sp-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 48 spike channels
(100Hz-8kHz, 50x gain) |
| PBX2/64sp-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 64 spike channels
(100Hz-8kHz, 50x gain) |
| |
|
|
|
| These preamplifiers have programmable referencing |
| PBX/16sp-r-G50 |
Preamplifier, 16 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| PBX/16wb-r-G50 |
Preamplifier, 16 wide-band channels (3Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| PBX/32sp-r-G50 |
Preamplifier, 32 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| PBX/48sp-r-G50 |
Preamplifier, 48 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| PBX/64sp-r-G50 |
Preamplifier, 64 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| |
|
|
|
| top |
|
|
|
| |
| Spike and Field Potential Preamplifiers - (The field potential preamplifiers require an analog recording option.) These preamplifiers have multi-pole filtering. |
| PBX2/16sp-G50/16fp-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 16 spike channels 100Hz-8kHz, 50x gain) and 16 field potential channels (0.7Hz-170Hz, 50x gain) |
| PBX2/16sp-G50/16fp-G50/16wb-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 16 spike channels (100Hz-8kHz, 50x gain) and 16 field potential channels (0.7Hz-170Hz, 50x gain), and 16 wide-band channels (3Hz-8kHz, 50x gain) |
| PBX2/32sp-G50/32fp-G50 |
Preamplifier with 2-pole low-cut and 4-pole high-cut filter, 32 spike channels (100Hz-8kHz, 50x gain) and 32 field potential channels (0.7Hz-170Hz, 50x gain) |
| |
|
|
|
| These preamplifiers have programmable referencing |
| PBX/16sp-r-G50/16fp-G50 |
Preamplifier, 16 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) and 16 field potential channels (0.7Hz-170Hz, 50x gain, 2-pole low-cut and 4-pole high-cut filter) |
| PBX/16sp-r-G50/16fp-G50/16wb-G50 |
Preamplifier, 16 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing), 16 field potential channels (0.7Hz-170Hz, 1000x gain, 2-pole low-cut and 4-pole high-cut filter), and 16 wide-band channels (3Hz-8kHz, 50x gain) |
| PBX/32sp-r-G50/32fp-G50 |
Preamplifier, 32 spike channels (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) and 32 field potential channels (0.7Hz-170Hz, 50x gain, 2-pole low-cut and 4-pole high-cut filter) |
| |
|
|
|
| Preamplifier Upgrade Boards |
| PRA2/16sp-G50 |
16 spike channel preamplifier card with 2-pole low-cut and 4-pole high-cut filter (100Hz-8kHz, 50x gain) |
| PRA2/16fp-G50 |
16 field potential preamplifier card with 2-pole low-cut and 4-pole high-cut filter (.7Hz-170Hz, 50x gain) |
| PRA2/16wb-G50 |
16 wide-band channel preamplifier card with 2-pole low-cut and 4-pole high-cut filter (3Hz-8kHz, 50x gain) |
| PRA/16sp-r-G50 |
16 spike channel preamplifier card (150Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| PRA/16fp-r-G50 |
16 field potential preamplifier card (3Hz-90Hz, single-pole filtering, 50x gain, with programmable referencing) |
| PRA/16wb-r-G50 |
16 wide-band channel preamplifier card (3Hz-9kHz, single-pole filtering, 50x gain, with programmable referencing) |
| |
|
|
|
| Digital Input Accessories |
| CBL/DI-Cortex-15L |
Digital input cable to interface to CORTEX system, standard female DB37
connector, 15 ft. length |
| CBL/DI-REX-15L |
REX digital input cable, standard female DB37 connector, 15 ft. length |
| CBL/DI-MEDASSOC-15L |
Digital input cable to interface to MED Associates system, 15 ft. length |
| CBL/DI-LAFINSTRU-15L |
Digital input cable to interface Lafayette Instruments system, 15 ft. length |
| |
|
|
|
| top |
|
|
|
| |
| Analog Recording Options - (Analog recording is required to record any continuous analog signals, such as spike, field potential and wide-band signals, eye position, blood pressure, etc.) These National Instruments Subsystems include the board, cabling, breakout box, and interface wiring. |
| PCI/exp4 |
PCI expansion chassis with power supply, host-link board, timing board and cable, and 4 PCI slots available for A/D. Includes 19" rack mount. |
| ADC/16C-12B-1 |
National Instruments A/D subsystem plus accessories (SCB-68, CBL/SCB-68 cable, and PCI-6040E board) for 16-channel analog recording (250 kS/sec, 12-bit res.) |
| ADC/16C-12B-2 |
National Instruments A/D subsystem plus accessories (SCB-68, CBL/SCB-68 cable, and PCI-6070E board) for 16-channel analog recording (1.25 MS/sec, 12-bit res.) |
| ADC/16C-12B-1-BNC2090 |
National Instruments A/D subsystem plus accessories (BNC2090, 2 meter CBL/BNC2090 cable, and PCI-6040E board) for 16-channel analog recording (250 kS/sec, 12-bit res.) |
| ADC/16C-PXI-12B-2 |
National Instruments A/D subsystem plus accessories (SCB-68, 1 meter CBL/SCB-68 cable, and PXI-6070E board) for 16-channel analog recording (1.25 MS/sec, 12-bit res.) |
| ADC/16C-16B-1 |
National Instruments A/D subsystem plus accessories (SCB-68, CBL/SCB-68 cable, and PCI-6052E board) for 16-channel analog recording (333 kS/sec, 16-bit res.) |
| ADC/16C-PXI-16B-1 (NEW) |
National Instruments A/D subsystem plus accessories (SCB-68, 1 meter CBL/SCB-68 cable, and PXI-6052E board) for 16-channel analog recording (333 kS/sec, 16-bit res.) |
| ADC/16C-12B-2-BNC2090 |
National Instruments A/D subsystem plus accessories (BNC2090, 2 meter CBL/BNC2090 cable, and PCI-6040E board) for 16-channel analog recording (250 kS/sec, 12-bit res.) |
| ADC/64c-PCI-12B-1-C (NEW) |
National Instruments A/D subsystem plus accessories (C-HUB, 2 meter CBL/C-HUB cable, and PCI-6071E board) for 64-channel analog recording (1.25 MS/sec, 12-bit res.) |
| ADC/64c-PXI-12B-1-C |
National Instruments A/D subsystem plus accessories (C-HUB, 1 meter CBL/C-HUB cable, and PXI-6071E board) for 64-channel analog recording (1.25 MS/sec, 12-bit res.) |
| ADC/64C-12B-1 |
National Instruments A/D subsystem plus accessories (PBOB, 2 meter CBL/PBOB cable, and PCI-6071E board) for 64-channel analog recording (1.25 MS/sec, 12-bit res.) |
| ADC/64C-PXI-12B-1 |
National Instruments A/D subsystem plus accessories (PBOB, 1 meter CBL/PBOB cable, and PXI-6071E board) for 64-channel analog recording (1.25 MS/sec, 12-bit res.) |
| |
|
|
|
| Headstages |
| Headstages, Cables, and Tester Units - These are the most common types of headstages; there are many variations within each type. |
| HST/8m-G1-GR |
8-channel Microtech [10-pin] headstage, gain 1, grounded reference |
| HST/8o25-10P-GR |
8-channel Omnetics .025 [10-pin] headstage, gain 1, grounded reference |
| HST/8o50-G1-GR |
8-channel Omnetics .050 [10-pin] headstage, gain 1, grounded reference |
| HST/8o50-G20-GR |
8-channel Omnetics .050 [10-pin] headstage, gain 20, grounded reference |
| HST/16o25-18P-GR |
16-channel Omnetics .025 dual row [9-pin] headstage, gain 1, grounded reference |
| HST/32o25-36P-GR |
32-channel Omnetics .025 dual row [36-pin] headstage, gain 1, grounded reference |
| HST/4EMG-8o50-G20 |
4-channel EMG headstage with Omnetics .050 [10-pin] connector, gain 20, differential amplification, 16 Hz low-cut filter |
| HST/12EMG-26H-G20 |
12-channel EMG headstage with 26-pin male Harwin connector, gain 20, differential amplification, 30Hz, low-cut filter |
| HST/2EMG-DC-G20 |
2-channel EMG headstage with Omnetics .050 [5-pin] connector, gain 20, differential amplification, DC-coupled, 8kHz low-cut filter, with integrated 36" cable and Harwin connector |
| HST/16V-G20 |
16-channel VLSI headstage, 20x gain |
| HST/16V-G20-2LED |
16-channel VLSI headstage, 20x gain, 2 LED lights (one red, one green) |
| HST/32V-G20 |
32-channel VLSI headstage, 20x gain |
| HST/32V-G20-2LED |
32-channel VLSI headstage, 20x gain, 2 LED lights (one red, one green) |
| |
|
|
|
| Headstage Cables - These are the most common types of headstage cables; there are many variations within each type. The standard cable length is 36 inches. |
|
|
| HSC/8 |
8-channel headstage cable, 36" length |
| HSC/8-PW |
8-channel headstage cable, plastic wrap, 36" length |
| HSC/8-MW |
8-channel headstage cable, metal wrap, 36" length |
| HSC/16m |
16-channel Microtech headstage cable, 36" length |
| HSC/16o50 |
16-channel Omnetics .050 headstage cable, 36" length |
| HSC/16o50-PW |
16-channel Omnetics .050 headstage cable, plastic wrap, 36" length |
| HSC/16o50-MW |
16-channel Omnetics .050 headstage cable, metal wrap, 36" length |
| HSC/16o25 |
16-channel Omnetics .025 headstage cable, 36" length |
| HSC/32o25 |
32-channel Omnetics .025 headstage cable, 36" length |
| HSC/32o25-PW |
32-channel Omnetics .025 headstage cable, plastic wrap, 36" length |
| HSC/16V |
Headstage cable for 16-channel VLSI headstage, 36" length |
| HSC/32V |
Headstage cable for 32-channel VLSI headstage, 36" length |
| HSC/12EMG |
Headstage cable for 12-channel EMG headstage, 16-pin female Harwin
connector to 26-pin female Harwin connector, 36" length |
| |
|
|
|
| Headstage Tester Units |
|
|
|
| HTU/16o25-18P |
Headstage tester unit, 16-channel Omnetics .025 dual-row [18-pin] |
| HTU/16V |
Headstage tester unit for 16-channel VLSI headstage |
| HTU/32o25-36P |
Headstage tester unit, 32-channel Omnetics .025 dual-row [36-pin] |
| HTU/32V |
Headstage tester unit for 32-channel VLSI headstage |
| HTU/8m |
Headstage tester unit, 8-channel Microtech |
| HTU/8m-S |
Headstage tester unit with spacing between connectors to accommodate an
8-channel Microtech headstage with gain |
| HTU/8o25-10P |
Headstage tester unit, 8-channel Omnetics .025 [10-pin] |
| HTU/8o50 |
Headstage tester unit, 8-channel Omnetics .050 |
| HTU4EMG-8o50 |
Headstage tester unit to accommodate a 4-channel EMG headstage, Omnetics .050 [10-pin] connector |
| HTU/8o50 |
Headstage tester unit with spacing between connectors to accommodate an
8-channel Omnetics headstage with gain |
| |
|
|
|
Headstage Interface Hardware |
| Headstage Input Connectors, Mating Connectors, and Adaptors |
| Headstage Input Connectors - Minimum order for connectors is $200. |
| CON/8o50f-10P |
8-channel [10-pin] female Omnetics .050 connector |
| CON/8o50f-10P-L |
8-channel [10-pin] female Omnetics .050 connector with latching mechanism, latch adjacent top pin 10 |
| CON/8o25f-9P |
8-channel [9-pin] female Omnetics .025 connector |
| CON/8o25f-10P |
8-channel [10-pin] female Omnetics .025 connector |
| CON/16o25f-18P |
16-channel [18-pin] female Omnetics .025 connector |
| CON/16f-V |
16-channel [18-pin] female Omnetics .025 connector with 6 guide pins |
| CON/32f-V |
32-channel [36-pin] female Omnetics .025 connector with 4 guide pins |
| |
|
|
|
| Headstage Mating Connectors - Minimum order for connectors is $200. |
| CON/8o50m-10P |
8-channel [10-pin] male Omnetics .050 connector |
| CON/8o50m-10P-L |
8-channel [10-pin] male Omnetics .050 connector with latching mechanism, latch adjacent to pin 10 |
| CON/8o25m-9P |
8-channel [9-pin] male Omnetics .025 connector |
| CON/8o25m-10P |
8-channel [10-pin] male Omnetics .025 connector |
| CON/16o25m-18P |
16-channel [18-pin] male Omnetics 0.025 connector |
| CON/16m-V |
16-channel [18-pin] male Omnetics .025 connector with 6 guide pins |
| CON/32m-V |
32-channel [36-pin] male Omnetics .025 connector with 4 guide pins |
| |
|
|
|
| top |
|
|
|
| |
|
|
|
| ADP/8o50-AMP-f |
8-channel [10-pin] Omnetics .050-to-female amphenol pin adaptor set |
| ADP/8o50-MICH |
8-channel [10-pin] Omnetics .050-to-16 channel Michigan Probe adaptor |
| ADP/8o50-NAN-4 |
Adaptor to interface 8-channel (10-pin) Omnetics .050 headstage to 1-4 NAN electrode drive channels |
| ADP/8o50-NAN-8 |
Adaptor to interface 8-channel (10-pin) Omnetics .050 headstage to 5-8 NAN electrode drive channels |
| ADP/TREC3-PBX16 |
Adaptor cable to connect 3-channel Thomas Recording drive (with female DB25) to PBX/16 (male Harwin), 36 in. length |
| ADP/TREC5-PBX16 |
Adaptor cable to connect 5-channel Thomas Recording drive (with female DB25) to PBX/16 (male Harwin), 36 in. length |
| ADP/TREC16-PBX16 |
Adaptor cable to connect 16-channel Thomas Recording drive (with female DB25) to PBX/16 (male Harwin), 36 in. length |
| EMG/12D-SL-input |
SafeLead Input panel for full differential 12-channel EMG and EEG headstage |
| |
|
|
|
Wireless Headstage System, Commutator, Computer, and Data Analysis Software
|
| Plexon/TBSI Wireless Headstage System |
| HST/Neuro15Battery24 |
Additional battery pack for 24-hour operation |
| HST/NeuroRadioRX |
Wireless system receiver unit, 6.25x gain |
| HST/NeuroRadioBPRX |
Wireless system receiver unit (backpack version), 1.25x gain |
| HST/15Radio_025_18 |
15-channel wireless headstage, Omnetics .025 [18 pin] connector, 80x gain |
| HST/15Radio_025_36 |
15-channel wireless headstage, Omnetics .025 [36 pin] connector, 80x gain |
| HST/15Radio_050_20 |
15-channel wireless headstage, Omnetics .050 [20 pin] connector, 80x gain |
| HST/15Radio_025_18_24H |
15-channel wireless headstage, Omnetics 025 [18 pin] connector, with 24 hour battery pack, 80x gain |
| HST/15Radio_025_36_24H |
15-channel wireless headstage, Omnetics .025 [36 pin] connector, with 24 hour battery pack, 80x gain |
| HST/15Radio_050_20_24H |
15-channel wireless headstage, Omnetics .050 [20 pin] connector, with 24 hour batter pack, 80x gain |
| HST/15RadioBP_025_18-7L |
15-channel VLSI wireless headstage backpack system, Omnetics .025 [18 pin] connector, 400x gain, 7 cm cable between headstage and backpack |
| HST/15RadioBP_025_18_24H-7L |
15-channel VLSI wireless headstage backpack system, Omnetics .025 [18 pin] connector, 24 hour battery pack, 400x gain, 7 cm cable between headstage and backpack, 7 cm cable between headstage and backpack |
| HST/15RadioBP_025_18-9L |
15-channel VLSI wireless headstage backpack system, Omnetics .025 [18 pin] connector, 400x gain, 9 cm cable between headstage and backpack |
| HST/15RadioBP_025_18_24H-9L |
15-channel VLSI wireless headstage backpack system, Omnetics .025 [18 pin] connector, 24 hour battery pack, 400x gain, 9 cm cable between headstage and backpack |
| |
|
|
|
| Commutators |
| COM/16 |
16-channel commutator with Harwin connectors |
| COM/15m |
15-channel commutator with servo motor and Harwin connectors |
| COM/32 |
32-channel commutator with Harwin connectors |
| COM/32m-H |
32-channel commutator with Hall effect sensor, stepper motor, and Harwin connectors (for passing 32-signal channels plus headstage reference, ground and, power channels) |
| COM/64m-H |
64-channel commutator with Hall effect sensor, stepper motor, and Harwin connectors (for passing 64-signal channels plus headstage reference, ground and, power channels) |
| COM/96m-H |
96-channel commutator with Hall-effect sensor, stepper motor, and Harwin connectors (for passing 96-signal channels plus headstage reference, ground and, power channels) |
| COM/128m-H |
128-channel commutator with Hall-effect sensor, stepper motor, and Harwin connectors (for passing 128-signal channels plus headstage reference, ground and, power channels) |
| (Higher channel count commutators available upon request.) |
| |
|
|
|
| top |
|
|
|
| |
|
|
|
| Computers and Test Equipment |
| PCI/exp4 |
PCI expansion chassis with power supply, host-link board, timing board and cable, and 4 PCI slots available for A/D. Includes 19" rack mount. |
| HDS/507 |
Hameg 507 digital oscilloscope |
| DELL/OptiPlex745 |
Dell Optiplex 745 Minitower, Core 2 Duo, 250GB hard drive, 2.13GHz, 1.0GB RAM, DVD/CD-RW, Dual Video, WinXP |
| MON/19LCD |
19 in. flat-panel, LCD monitor |
| MON/20LCD-W |
20 in. wide-aspect, flat-panel monitor |
| MON/24LCD-W |
24 in. wide-aspect, flat-panel, LCD monitor |
| |
|
|
|
| Data-Analysis Software |
OFS/v2-2usb |
Offline Sorter, version 2 with OFSv2 manual, 2 USB keys (two seat license) |
OFS/UPG-2usb |
Offline Sorter upgrade from version 1 to version 2, 2 USB keys (two seat license) |
OFS/k-pp |
Additional Offline Sorter ( version 2) parallel port license key |
OFS/k-usb |
Additional Offline Sorter (version 2) USB license key |
NEX/v4-3usb |
NeuroExplorer Data Analysis software, version 4 with manual, three seat license (USB keys) |
NEX/UPG3-4-3usb |
NeuroExplorer Data Analysis software upgrade from version 3 to version 4, 3 USB keys (three seat license) |
NEX/UPG2-4-3usb |
NeuroExplorer Data Analysis software upgrade from version 2 to version 3, 3 USB keys (three seat license) |
NEX/k-pp |
Additional NeuroExplorer (version 3) data analysis software parallel port license key |
NEX/k-usb |
Additional NeuroExplorer (version 3) data analysis software USB license key |
| (Other key combinations are available upon request.) |
